0
Products
- Home
- Products
- Garment Processing & Finishing Equipment
- Shirt & Garment Part Preparation
- Shirt Arm Hole Press OP-699
Shirt & Garment Part Preparation
Shirt Arm Hole Press OP-699
Press shoulder seams before sewing.
- Features
- Designed for shirt shoulder and armhole seam pressing
- Suitable for pressing before sleeve seam sewing
- Fully automatic pneumatic pressure system
- Vacuum function on lower mold for fabric holding
- Automatic temperature control with forced cooling
- Two-hand safety operation
- Production capacity of 180–230 pieces per hour
- Suitable for various shirt fabrics
Description
OP-699 is used for pressing shirt shoulder seams, armhole seams, and areas where interlining strips are applied before sewing. It is suitable for shirt parts that require pre-pressing before the sleeve and body seam is completed. The machine uses pneumatic pressure to press the fabric evenly. The lower mold includes a vacuum function to hold the fabric in position during pressing. When the temperature becomes too high, the forced cooling function activates through the temperature control system.
Specifications
| Model | OP-699 |
|---|---|
| Model | OP-699 |
| Power supply | 1P / 220V |
| Heater (kW) | 2.3 |
| Max pressure (MPa) | 0.5 |
| Temperature (°C) | Room temperature–180 |
| Air consumption (L/min) | 20 |
| Dimensions L × W × H (mm) | 1150 × 1150 × 1950 |
| Packing volume L × W × H (mm) | 1280 × 1280 × 2120 |
| N.W / G.W (kg) | 360 / 460 |
*Design and specifications subject to change without prior notice.
